BRACKET AS. 2145722 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Brackets     3    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01458588
Illustration 2 g01458600
Attach Tooling (A) and a suitable lifting device to fuel tank (10). The weight of fuel tank (9) is approximately 999 kg (2200 lb). Install fuel tank (9). Install bolts (10) .
Illustration 3 g01458635
Install any remaining clips (8) from the fuel tank.
Illustration 4 g01458587
Install clamp (7) .
Illustration 5 g01458533
Install clamp (6) .
Illustration 6 g01458532
Install hose assembly (5) to the fuel tank. Connect hose assembly (5). Install bracket (4) .
Illustration 7 g01458531
Install harness assemblies (3) to the fuel tank. Connect harness assemblies (3).
Illustration 8 g01458530
Connect harness assembly (2) .
Illustration 9 g01458529
Install guard (1) .End By:
Install the fuel heater. Refer to Disassembly and Assembly, "Fuel Heater - Install".
Install the engine oil renewal tank. Refer to Disassembly and Assembly, " Engine Oil Tank (Metering, Oil Renewal System) - Install".
Install the steering oil tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering) (Brake)- Remove".