BRACKET AS 2175141 - Caterpillar

Illustration 1 g00563260
(1) Chassis Control Module. (2) Electronic Monitoring Center (EMC).This fault code indicates that data communications between Electronic Monitoring Center (EMC) and the transmission control circuits of the CCM has failed.Note: Communication between electronic control modules is re-initiated when a value for any feature of Mode 12 is saved. Before performing the following Steps of this procedure, enter Mode 12 and re-save the existing value of any feature. Check to see if fault code still exists. For more information, see Systems Operation, "Mode 12 - Machine Features Configuration". If F202, F203 and F204 report, go to Step 4.
Inspect connector C006 at the CCM module for loose or pushed out pins or for separated connector. Expected Result: The connector is separated. There are loose pins.
YES, repair or reconnect connector C006 at the CCM module and recheck fault codes. If