BRACKET 2303610 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Brackets     2    Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the fuel tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g01269962
Disconnect hose assembly (1). Disconnect harness assembly (2). Remove cable straps (3) .
Illustration 2 g01269827
Remove bolts (4). Remove sheet (5) .
Illustration 3 g01269862
Disconnect hose assembly (6). Disconnect hose (7) .
Illustration 4 g01269863
Illustration 5 g01269869
Install Tooling (A) and a suitable lifting device to fuel tank (8). The weight of fuel tank (8) is approximately 544 kg (1200 lb). Remove bolts and spacers (9). Remove fuel tank (8) .