BRACKET AS 2305529 - Caterpillar

(1) Pump drive gearMake alignment of "H" marks, as shown.(2) Camshaft gearMake alignment of "V" marks, as shown.(3) Water pump drive gear(4) Accessory drive gear(5) Idler gear (small) and balancer gear (large)Make alignment of "V" marks, as shown.(6) Torque for the bolts 55 10 N m (40 7 lb ft)(7) Diameter of the shaft (new) ... 63.500 0.013 mm ... (2.5000 0.0005 inch)Bore in the bearing (after assembly) ... 63.602 0.038 mm ... (2.5040 0.0015 inch)The bearing joint must be in the center of the heavy section of the gear at assembly.(8) End clearance (new) ... 0.28 to 0.35 mm ... (0.011 to 0.014 inch)(9) Crankshaft gearMake alignment of "V" marks, as shown.(10) Engine oil pump drive gear(11) PlateThe lubrication groove must be against the gear.