BRACKET AS 2341025 - Caterpillar

Illustration 1 g01999898
Location of the torque converter oil filter
(1) Torque converter oil filter
(2) Auxiliary port
(3) Pressure port for sensor
(4) Oil sample port
(5) Inlet
Illustration 2 g06352252
Components of the torque converter oil filter
(2) Auxiliary port
(3) Pressure port for sensor
(4) Oil sampling port
(5) Inlet
(6) Outlet
(7) Housing
(8) ElementsTorque converter oil filter (1) is fastened to the right side of the rear of the torque converter. Oil from the hydraulic tank goes to the pump section for the torque converter. The pump section for the torque converter sends oil to the torque converter oil filter (1).There are three ports that are on the torque converter oil filter. The first port (4) is used to take oil samples. The left port (2) is an auxiliary port. The right port (3) is used for a pressure sensor.Oil flows through inlet (5). The oil fills the space between the inside housing (7), and elements (8). During normal operation, the oil goes through elements (8) and through outlet (6). The oil then goes to the torque converter.Elements (8) stop any debris that is in the oil.Correct maintenance must be used to be certain that elements (8) do not become full of debris. Debris in elements (8) will stop the flow of clean oil to the hydraulic system.