BRACKET AS 2409973 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-7505     Hydraulic Jack     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01114945
Remove plug (1) in order to drain the fuel into a suitable container. The capacity of the fuel tank is approximately 187 kg (412 lb).
Illustration 2 g01114947
Remove bolt (2) .
Illustration 3 g01949687
Disconnect hoses (3). Disconnect harness assembly (4).
Illustration 4 g01949699
Illustration 5 g01114954
Position Tooling (A) under fuel tank (5). The weight of fuel tank (5) is approximately 77 kg (170 lb). Remove bolts (6) from each side. Remove fuel tank (5) .Installation Procedure
Install fuel tank (5) in the reverse order of removal.