2471871 BRACKET AS-MOUNTING Caterpillar parts
854K, 992K, 993K
Rating:
Alternative (cross code) number:
CA2471871
247-1871
2471871
CA2471871
247-1871
2471871
Weight: 0.39 pounds 0 kg.
WHEEL DOZER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement Part for Starter & Relay Solenoid Fits for Polaris Trail Boss 250 1986 1987 1988 1989 1990-99 relpart#2471871
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Compatible Year Range: 1985-2006. Replace OE Part Number 1: SMU0034K 3083646, 3083760 3084403 3085393 || Replace OE Part Number 2: 3085393, 3084403
Generic NOTE - Package included: 1 Set ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Compatible Year Range: 1985-2006. Replace OE Part Number 1: SMU0034K 3083646, 3083760 3084403 3085393 || Replace OE Part Number 2: 3085393, 3084403
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576Start By:
Remove the extendable stick.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06193471
Typical example.
Installation Procedure
Install the extendable stick in the reverse order of removal.Disassembly and Assembly Information
Table 1
Required Tools
Tool Part Number Part Description Qty
B - Loctite 243 -
C 152-4249 Hydraulic Cylinder Repair Stand Gp 1
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 2 g03833769 (1) Before assembly, lubricate the sealing lip with the fluid that is being sealed. (2) Using Tooling (C), tighten piston assembly to a torque of 450 25 N m (332 18 lb ft). (3) Before assembly, apply Tooling (B) to threads. Using Tooling (C), tighten head assembly to a torque of 600 130 N m (443 96 lb ft). (4) Tighten set screws to a torque of 23 3 N m (204 27 lb in).
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576Start By:
Remove the extendable stick.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06193471
Typical example.
Installation Procedure
Install the extendable stick in the reverse order of removal.Disassembly and Assembly Information
Table 1
Required Tools
Tool Part Number Part Description Qty
B - Loctite 243 -
C 152-4249 Hydraulic Cylinder Repair Stand Gp 1
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 2 g03833769 (1) Before assembly, lubricate the sealing lip with the fluid that is being sealed. (2) Using Tooling (C), tighten piston assembly to a torque of 450 25 N m (332 18 lb ft). (3) Before assembly, apply Tooling (B) to threads. Using Tooling (C), tighten head assembly to a torque of 600 130 N m (443 96 lb ft). (4) Tighten set screws to a torque of 23 3 N m (204 27 lb in).
Caterpillar parts catalog:
Parts bracket Caterpillar catalog:
2779702
BRACKET
993K
993K
2736339
BRACKET
844K, 990K, 993K
844K, 990K, 993K
2822903
BRACKET AS
993K
993K
2822902
BRACKET AS
993K
993K
4154017
BRACKET AS
993K
993K
4154016
BRACKET AS
993K
993K
3049274
BRACKET AS
993K
993K
3229123
BRACKET AS
993K
993K
2482465
BRACKET AS
993K
993K
2482533
BRACKET AS
993K
993K
2443991
BRACKET
993K
993K
2499360
BRACKET AS
854K, 992K, 993K, 994H
854K, 992K, 993K, 994H