BRACKET AS 2507605 - Caterpillar

Rear Window with Ring Seal (If Equipped)
Illustration 1 g00681020
(1) Ring
(2) O-ring seal The rear window serves as an alternate exit.To remove the rear window, pull ring (1) and push out the glass.Completely remove O-ring seal (2) from the seal that supports the glazing support seal. This will provide enough clearance so that the seal can hinge and the glazing can pass outward.Rear Window with Lever (If Equipped)
Illustration 2 g01137161
(3) Lock pin
(4) Lever
(A) Unlocked position
(B) Locked position The rear window serves as an alternate exit. The rear window can be removed from the inside of the cab or from the outside of the cab.Note: When lock pin (3) is in the locked position (B), the rear window cannot be removed. When you operate the machine, place lock pin (3) in unlocked position (A).Removing Rear Window from the Inside
Place lock pin (3) in unlocked position (A).
Grip the lever (4). Fully turn the lever in the direction of the arrow and push the rear window outward. Removing Rear Window from the Outside
Illustration 3 g01137162
Make sure that lock pin (3) is in the unlocked position (A).
Grip lever (4). Fully turn the lever in the direction of the arrow and pull backward in order to remove the window.