BRACKET AS 2509984 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
Illustration 1 g00753643
Install Tooling (A) to fan (12), as shown.
Attach a suitable hoist and lifting chains to Tooling (A), as shown.
Use the hoist in order to install fan (12). The weight of fan (12) is 340 kg (750 lb).
Illustration 2 g00753644
Lower Hinge
Install pin (13) and washer (15) .
Install bolt (14) and the washer.
Repeat Steps 4 and 5 for the upper pin.
Illustration 3 g00753642
Install latch assembly (11), the bolt, and the washer.
Illustration 4 g00753641
Right Side View
Connect three hose assemblies (10) .
Illustration 5 g00753640
Right Side View
Connect electrical connector (8) .
Install three bolts (9), the washers, and the clips.
Illustration 6 g00753654
Illustration 7 g00753653
Attach a suitable hoist and lifting slings to cover (6), as shown.
Use the hoist in order to install cover (6). The weight of cover (6) is 45 kg (100 lb).
Install bolts (3) and (4), the spacers, and the washers finger tight.
Remove lifting slings (5) and (7) .
Tighten bolts (3) and (4) .
Illustration 8 g00751240
Engage two clamps (2) .
Illustration 9 g00751239
Close access door (1) on left side of machine. Repeat this procedure for the opposite side.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.