BRACKET GP-MOUNTING 2697807 - Caterpillar

A-pin
Illustration 1 g01026371
Sectional View for the A-pin
Table 1
Dimensions for the A-pin    
Description     Dimension     Comments    
Outside Diameter Inside Diameter    
Bore for the Frame     -    
167.00 0.05 mm (6.5748 0.0020 inch)     4 Bores    
Collar    
166.870 0.03 mm (.5697 0.0015 inch)    
120.000 0.038 mm (4.7244 0.0015 inch)     -    
Bore for the Boom     -    
168.00 0.05 mm (6.6142 0.0020 inch)     2 Bores    
Boom Bearing    
168.1500 0.025 mm (6.6201 0.0010 inch)    
120.300 0.025 mm (4.7362 0.0010 inch)     The dimensions are before assembling the bearings.    
Pin Assembly    
119.850 0.025 mm (4.7185 0.0010 inch)     -     -     (X) Install the bearing inside the edge of the bore to the following dimension. ... 5.0 0.5 mm (0.20 0.02 inch)Note: Clean the bores and apply 5P-3931 Anti-Seize Compound to the outside diameter of the collars before installation. Do not apply Anti-Seize Compound to the outside diameter of the bearings.Note: Lubricate the pin diameter and the inside diameter of the bearings with 8T-9582 Oil (SAE 80W90) before you install the pin.