AVSPARE.COM
parts catalog

BRACKET AS. 2810490 - Caterpillar



2810490 BRACKET AS. Caterpillar parts BRACKET
Rating:
61
Alternative (cross code) number:
CA2810490
281-0490
2810490
Caterpillar 2810490 BRACKET AS.

Buy BRACKET AS. 2810490 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Image1
Image2
Image3
Image4
****Affected Product****
- Inspect and verify the head bolt type.
- If 12 point head bolts are found and are tight, perform the Before Failure Rework.
- If a 12 point bolt is loose, missing, or broken, perform the After Failure Rework.
- If some other head bolt type is used, no additional rework is required.
Action Required is completed when all 12 point head bolts on boom, stick, and bucket cylinders have been tightened with the torque-turn process.
Before Failure Rework - Remove and tighten one bolt at a time. Remove one 12 point head bolt at a time on boom, stick, and bucket cylinders and follow the torque-turn process detailed below:
1. Mark the bolt. Refer to Image1.
2. Tighten the bolt to a specified torque of 300 N.m (220 lb-ft).
3. Mark the work surface. Refer to Image2.
4. Turn the socket 30 degrees to align A with B. Refer to Image2 and 3.
After Failure Rework - Remove and tighten one bolt at a time. If a 12 point head bolt is broken, loose, or missing during inspection, replace with a socket head bolt from Image4. Follow the torque-turn process detailed below:
1. Mark the bolt. Refer to Image5.
2. Torque the bolt to a specified torque of 300 N.m (220 lb-ft).
3. Mark the work surface. Refer to Image6.
4. Turn the socket 30 degrees to align A with B. Refer to Image6 and 7.
Image1
Image2
Image3
Image4
Image5
Image6
Image7
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock. Claim 1.0 hours labor for each cylinder listed in Image1.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-6000 hrs,
25-48 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 0.5-hour job
Note: 0.5 hours is allowed for inspection and if none of the cylinder head bolts need to be reworked.
Note: A total of 5.5 hours is allowed for Before or After Failure rework on boom, stick, and bucket cylinders, and cost any new bolts.
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.


Parts bracket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.