BRACKET 3085344 - Caterpillar

Adjust all mirrors as specified in the Operation and Maintenance Manual. Failure to heed this warning can lead to personal injury or death.
Slips and falls can result in personal injury. Use the machines access systems when adjusting the mirrors. If the mirrors cannot be reached using the machine access systems follow the instructions found within the Operation and Maintenance Manual, "Mirror" in order to access the mirrors.
Note: Your machine may not be equipped with all of the mirrors that are described in this topic.
Illustration 1 g01708694Mirrors provide additional visibility around your machine. Make sure that the mirrors are in proper working condition and that the mirrors are clean. Adjust all mirrors at the beginning of each work period and adjust the mirrors when you change operators. Modified machines or machines that have additional attachments may influence visibility in the mirrors. For more information refer to this Operation and Maintenance Manual, "Visibility Information" and , "Restricted Visibility".Mirror Adjustment
Park the machine on a level surface.
Stop the engine.Note: Hand tools will be needed in order to adjust the mirrors. Refer to Specifications, SENR3130, "Torque Specifications" for the recommended torque.Right Side Rear View Mirror (1)
Illustration 2 g01687255If equipped, adjust the right side rear view mirror in order to provide visibility to the following areas from the operator seat:
the right side of the dump body and the rear tire
the upper right edge of the dump body that will allow the truck to be positioned for loading by viewing the loader bucket pivot pin
the point of contact between the right rear tire and the ground
an obstacle on the ground 1 m (3.3 ft) from the right side of the dump body
Refer to illustration 2.When the machine is equipped with a standard dump body (width), there are two bolts on the back of the mirror and two bolts on the mirror bracket for the adjustment of the right side rear view mirror.When the machine is equipped with a wide dump body, there are two bolts on the back of the mirror and three bolts on the mirror bracket for the adjustment of the right side rear view mirror.Left Side Rear View Mirror (2)
Illustration 3 g01687240If equipped, adjust the left side rear view mirror in order to provide visibility to the following areas from the operator seat:
the left side of the dump body and the rear tire
the upper left edge of the dump body that will allow the truck to be positioned for loading by viewing the loader bucket pivot pin
the point of contact between the right rear tire and the ground
an obstacle on the ground 1 m (3.3 ft) from the left side of the dump body
Refer to illustration 3.There are three bolts on the back of the mirror and four bolts on the mirror bracket for the adjustment of the left side rear view mirror.