BRACKET 3120492 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 208-5040 Support Tube 1
B 189-0412 Clevis 1
C 1U-9200 Lever Puller Hoist 1
D 422-5474 Lifting Eye Assembly 1
8T-6385 Bolt 1 Start By:
Remove the hood.
Remove the muffler.
Remove the fan.
Remove belt.
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g03888898
Remove bolts (1) and panel (2).
Remove bolts (3) and panel (4).
Illustration 2 g03888900
Remove bolts (5) and panel (6).
Remove bolts (7) and panel (8).
Remove bolts (9) and panel (10).
Illustration 3 g03888931
Remove bolts (11) and brace (12).
Remove bolts (13) and panel (14).
Illustration 4 g03888956Note: Picture is for photo purpose only.
Disconnect harness assemblies (15), (18), and (19).
Disconnect clamps (17) and (20).
Disconnect hose assemblies (16) and (21).
Remove the serpentine belt. Refer to Operation and Maintenance Manual, "Belt - Remove and Install".
Illustration 5 g03888963
Disconnect harness assemblies (22). Disconnect A/C compressor (23) and reposition.
Illustration 6 g03888967
Disconnect cable assemblies (24) and harness assembly (25).
Illustration 7 g06092125
Illustration 8 g06092129
Disconnect harness assembly (26) and cable assemblies (27).
Attach a suitable lifting device to engine (29). The weight of engine (29) is approximately 680 kg (1500 lb).
Attach Tooling (A), Tooling (B), Tooling (C), and Tooling (D) to main hydraulic pump (31) to support main hydraulic pump (31).
Remove bolts (28) and (30). Remove engine (29).Installation Procedure
Install engine (29) in the reverse order of removal.
Tighten bolts (28) to a torque of 520 70 N.m (384 52 lb ft).End By:
Install belt.
Install the fan.
Install the muffler.
Install the hood.