3150566 BRACKET AS Caterpillar parts
AP-655D, AP555E, BG655D
Rating:
Alternative (cross code) number:
CA3150566
315-0566
3150566
CA3150566
315-0566
3150566
Weight: 24 pounds 10 kg.
ASPHALT PAVER,
Number on catalog scheme:
6
For full view, you need register
Information:
Table 3 lists warning messages that relate to general AccuGrade system operation.
Table 3
General Warning Messages
Message Reason Solution
"Avoid Zone Entered" Machine has entered an "Avoidance Zone". This is an area that has been designated dangerous for machine operation Use "Plan View" to guide the machine out of the Avoidance Zone.
"Loading Data" The display is loading the current design information. The display is loading the "Layered Lift" surface. Wait for the message to stop. It will disappear after a short period.
"Check Machine Type" The stored machine settings are invalid. Restore the correct machine settings file or ask the site manager to correct the system configuration.
Table 4
General Warning Messages
Message Problem Solution
Bench Required A 2D vertical guidance method is selected. The system requires a reference elevation. Refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section.
Rotate Machine The machine's orientation has not been initialized. Refer to Operation Maintenance Manual, SEBU8501, "Machine Checks" section. The information follows the subtitle "Check The 3D Bucket Guidance".
Select Profile The profile vertical guidance method has been selected, and the system requires that a profile design be selected. Select a profile.
1) From any guidance screen, press "Profile". The "Select Profile" dialog appears.
2) Select the desired profile. The guidance screen appears again. The warning message, "Bench Required", is displayed. Also, "Bench Required" will be flashing.
For information on benching, refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section. Table 5 lists the messages that relate to the AccuGrade system that is installed on excavators.
Table 5
Excavator Status Messages
Message Indicates that... Solution
"Check Boom Sensor" The boom position sensor is not connected, out of range, or not zeroed. Check the boom position sensor and cable harness
Table 3
General Warning Messages
Message Reason Solution
"Avoid Zone Entered" Machine has entered an "Avoidance Zone". This is an area that has been designated dangerous for machine operation Use "Plan View" to guide the machine out of the Avoidance Zone.
"Loading Data" The display is loading the current design information. The display is loading the "Layered Lift" surface. Wait for the message to stop. It will disappear after a short period.
"Check Machine Type" The stored machine settings are invalid. Restore the correct machine settings file or ask the site manager to correct the system configuration.
Table 4
General Warning Messages
Message Problem Solution
Bench Required A 2D vertical guidance method is selected. The system requires a reference elevation. Refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section.
Rotate Machine The machine's orientation has not been initialized. Refer to Operation Maintenance Manual, SEBU8501, "Machine Checks" section. The information follows the subtitle "Check The 3D Bucket Guidance".
Select Profile The profile vertical guidance method has been selected, and the system requires that a profile design be selected. Select a profile.
1) From any guidance screen, press "Profile". The "Select Profile" dialog appears.
2) Select the desired profile. The guidance screen appears again. The warning message, "Bench Required", is displayed. Also, "Bench Required" will be flashing.
For information on benching, refer to the Operation Maintenance Manual, SEBU8501, "Establishing an Elevation Reference" section. Table 5 lists the messages that relate to the AccuGrade system that is installed on excavators.
Table 5
Excavator Status Messages
Message Indicates that... Solution
"Check Boom Sensor" The boom position sensor is not connected, out of range, or not zeroed. Check the boom position sensor and cable harness
Caterpillar parts catalog:
Parts bracket Caterpillar catalog:
120M, 12M, 2470C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 320D GC, 320D L, 320D2, 320D2 L, 323D L, 414E, 416B, 41...
2876849
BRACKET AS
120M, 12M, 924H, 924HZ, 928HZ, 938H, AP-600D, AP-655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, CS-74B
120M, 12M, 924H, 924HZ, 928HZ, 938H, AP-600D, AP-655D, C6.6, CP-56, CP-64, CP-76, CS-56B, CS-64, CS-74, CS-74B
1186934
BRACKET AS
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655D, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655D, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D
3366744
BRACKET AS
AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
2704280
BRACKET AS
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D
3825067
BRACKET
AP-600D, AP-655D
AP-600D, AP-655D
2997249
BRACKET
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
3929506
BRACKET AS
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
3078207
BRACKET AS
AP-655D
AP-655D
3150568
BRACKET AS
AP-655D, AP555E, BG655D
AP-655D, AP555E, BG655D
3150561
BRACKET AS
AP-655D, AP1055E, AP555E, BG1055E, BG655D
AP-655D, AP1055E, AP555E, BG1055E, BG655D
3150563
BRACKET AS
AP-655D, AP1055E, AP555E, BG1055E, BG655D
AP-655D, AP1055E, AP555E, BG1055E, BG655D
3676279
BRACKET
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
3676278
BRACKET
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
3709152
BRACKET AS
AP-600D, AP-655D
AP-600D, AP-655D
3779913
BRACKET AS
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
3706945
BRACKET AS
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E
3706946
BRACKET AS
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E
3065153
BRACKET
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D
3343369
BRACKET AS
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E, BG600D, BG655D
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E, BG600D, BG655D
3587322
BRACKET AS
AP-655D, AP1055E, AP555E, BG1055E, BG655D
AP-655D, AP1055E, AP555E, BG1055E, BG655D