parts catalog

BRACKET AS 3236745 - Caterpillar

3236745 BRACKET AS Caterpillar parts BRACKET
Alternative (cross code) number:
Caterpillar 3236745 BRACKET AS

Buy BRACKET AS 3236745 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g06089805
Table 1
Specification for 471-8011 Front Idler Gp
Item Qty Part Specification Description
1 2 482-9627 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Prior to assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The metal seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
2 1 6I-6477 Idler Shaft Install the idler shaft. Position the "R" that is stamped on the end face of the idler shaft backward into the front idler bearing.
3 - - Prior to assembly, clean the surface to remove the protective coating.
4 2 099-0163 Pin Install the pin with the slit in the range that is specified. The correct position of the pin is shown in view B-B.
C - - Specified range is 40 degrees.
D - - Angle from center line of idler shaft is 20 degrees.
- - - End play in axial direction:
Minimum is 0.10 mm (0.004 inch).
Maximum is 1.20 mm (0.047 inch).

Parts bracket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.