BRACKET AS 3276436 - Caterpillar

The movement of the governor weight assembly is transferred to the fuel rack on the fuel injection pump by control lever (4), arm (6) and the linkage to the fuel injection pump. A spring connects the arm and the control lever. This spring controls the movement of the governor weight assembly on the camshaft. When the angle of the control lever changes, tension on the spring changes. This action controls the linkage to the fuel rack on the fuel injection pump, which controls the engine rpm.The bolt for the maximum speed adjustment is mounted in the cylinder block. This adjustment limits the movement of arm (6). This adjustment should only be made by personnel with the correct training.The bolt for the maximum fuel adjustment is mounted in the cylinder block. This adjustment regulates the fuel injection at high engine rpm. This adjustment should only be made by personnel with the correct training.A spring connects the linkage to the fuel injection pump and mechanical stop control (2). When the engine is first started, the spring automatically increases the fuel flow to the cylinders.The fuel injection pump timing, the low idle, and the high idle are preset at the factory. Adjustments to the pump timing and idle rpm should only be made by personnel which have had the correct training. The timing for the fuel injection pump should only change if the camshaft or the cylinder block are replaced. The fuel injection pump timing should not change if the fuel injection pump is reinstalled with a shim that is the same size.The fuel rack automatically returns to the excess fuel position when the engine is stopped. The excess fuel position aids the cold starting of the engine.Fuel Injection Pump
Illustration 3 g00746909
Fuel injection pump (typical example) (1) Fuel line to the fuel injection nozzles (2) Fuel delivery valve (3) Nuts and bolts for mounting the fuel injection pump to the cylinder block (4) Shim (5) Vent screw for the fuel injection pump (6) Fuel flow from the fuel transfer pumpThe fuel injection pump is a cassette type pump. The pump is installed directly into the cylinder block.The fuel injection pump is a pressurized system that is totally enclosed. The pump sends the correct amount of fuel under high pressure at the correct time through the fuel injection nozzles to the individual cylinders. The fuel injection occurs near the end of the compression stroke. The fuel injection pump regulates the amount of fuel that is delivered to the fuel injection nozzles. This action controls the engine rpm by the governor setting or the position of the throttle control.During operation, extra fuel is used as coolant and lubricant for pump parts that move. The extra fuel is circulated through the pump housing. The extra fuel is then returned to the fuel tank. The return lines also remove air that is trapped in the fuel injection nozzles or the fuel injection pump housing.The fuel injection pump transfers fuel to the fuel injection nozzles at high