3366332 BRACKET AS Caterpillar parts
320D LRR, 320D RR
Rating:
Alternative (cross code) number:
CA3366332
336-6332
3366332
CA3366332
336-6332
3366332
Weight: 0.05 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
13
For full view, you need register
Information:
7. If the boom will be in this position for an extended period of time, engage the boom drum pawl.8. Move the cable drum transmission lever to NEUTRAL.Lowering the Boom Without Power
1. Disengage the boom drum pawl. Always disengage the boom drum clutch when lowering boom without power. 2. Squeeze handle and push boom drum brake lever forward to lower boom. Pull lever back to stop boom.Raising the Load
1. Push the boom drum clutch lever to the DISENGAGE position.2. With the power take-off clutch disengaged, move the transmission control to the desired raising speed. 3. Pull the load drum clutch lever to the ENGAGE position. It may be necessary to engage the power take-off clutch momentarily to engage the load drum clutch. 4. Engage the power take-off clutch and at the same time slightly release the load drum brake. DO NOT fully release the brake. 5. When the load reaches the desired height, simultaneously disengage the power take-off clutch and fully engage the load drum brake.6. Push the load drum clutch lever to the DISENGAGE position.7. Move the cable drum transmission control to NEUTRAL.Lowering the Load Without Power
1. Always push load drum clutch lever to DISENGAGE position when lowering load without power. 2. Squeeze handle and push load drum brake lever forward to lower load. Pull lever back to stop load from lowering.Lowering the Load Under Power
1. Disengage the boom drum pawl and the boom drum clutch.2. Move the cable drum transmission to REVERSE.3. Pull the load drum clutch lever to ENGAGE position. It may be necessary to engage the power take-off clutch momentarily to engage the load drum clutch. 4. Engage the power take-off clutch and at the same time release the load drum brake.Winch Operation
Make certain personnel are clear of cable when there is a load on the cable. Cable can break and cause personal injury.
Always winch with cable in as straight a line as possible behind tractor.For maximum service life of winch, engage winch at lowest practical engine speed. Heavy line loads will require winch engagements at higher engine speeds than with lighter loads.Line speed is controlled by the engine speed.
WINCH CONTROL CONSOLE BRAKE ON (NEUTRAL) - Towing, holding load or when winch is not in use. Cable will not move.
Exercise care with suspended loads. If engine speed is too low the weight of the load may cause it to drop, even though the winch is in REEL IN position.
BRAKE OFF (RELEASE) - Moving tractor away from heavy load, or lowering a load by its own weight. When released, the lever will return to neutral position. Cable will move out with load on cable.
Do not leave in BRAKE OFF for extended periods. When moving away from a load, operate tractor in low gear to prevent overspeeding of winch components.
REEL IN - Pull load toward machine. When released, the lever will return to neutral position. Cable will move toward the winch under power. REEL OUT - Lower light load with power, or moving away from load
1. Disengage the boom drum pawl. Always disengage the boom drum clutch when lowering boom without power. 2. Squeeze handle and push boom drum brake lever forward to lower boom. Pull lever back to stop boom.Raising the Load
1. Push the boom drum clutch lever to the DISENGAGE position.2. With the power take-off clutch disengaged, move the transmission control to the desired raising speed. 3. Pull the load drum clutch lever to the ENGAGE position. It may be necessary to engage the power take-off clutch momentarily to engage the load drum clutch. 4. Engage the power take-off clutch and at the same time slightly release the load drum brake. DO NOT fully release the brake. 5. When the load reaches the desired height, simultaneously disengage the power take-off clutch and fully engage the load drum brake.6. Push the load drum clutch lever to the DISENGAGE position.7. Move the cable drum transmission control to NEUTRAL.Lowering the Load Without Power
1. Always push load drum clutch lever to DISENGAGE position when lowering load without power. 2. Squeeze handle and push load drum brake lever forward to lower load. Pull lever back to stop load from lowering.Lowering the Load Under Power
1. Disengage the boom drum pawl and the boom drum clutch.2. Move the cable drum transmission to REVERSE.3. Pull the load drum clutch lever to ENGAGE position. It may be necessary to engage the power take-off clutch momentarily to engage the load drum clutch. 4. Engage the power take-off clutch and at the same time release the load drum brake.Winch Operation
Make certain personnel are clear of cable when there is a load on the cable. Cable can break and cause personal injury.
Always winch with cable in as straight a line as possible behind tractor.For maximum service life of winch, engage winch at lowest practical engine speed. Heavy line loads will require winch engagements at higher engine speeds than with lighter loads.Line speed is controlled by the engine speed.
WINCH CONTROL CONSOLE BRAKE ON (NEUTRAL) - Towing, holding load or when winch is not in use. Cable will not move.
Exercise care with suspended loads. If engine speed is too low the weight of the load may cause it to drop, even though the winch is in REEL IN position.
BRAKE OFF (RELEASE) - Moving tractor away from heavy load, or lowering a load by its own weight. When released, the lever will return to neutral position. Cable will move out with load on cable.
Do not leave in BRAKE OFF for extended periods. When moving away from a load, operate tractor in low gear to prevent overspeeding of winch components.
REEL IN - Pull load toward machine. When released, the lever will return to neutral position. Cable will move toward the winch under power. REEL OUT - Lower light load with power, or moving away from load
Caterpillar parts catalog:
Parts bracket Caterpillar catalog:
3361163
BRACKET AS
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318B, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E L, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318B, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E L, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318B, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D LN, 323D SA, 323E L, 324D L, 324E, 324E L, 32...
1189785
BRACKET-FRONT
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
1189784
BRACKET-REAR
318C, 319C, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
318C, 319C, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
2677695
BRACKET AS
311D LRR, 312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 323D L, 323D LN, 324D, 324D L, 325D L, 325D MH, 329D, 329D L, 330D, 330D L, 330D MH, 336D, 336D L, 336D2, 345...
311D LRR, 312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 323D L, 323D LN, 324D, 324D L, 325D L, 325D MH, 329D, 329D L, 330D, 330D L, 330D MH, 336D, 336D L, 336D2, 345...
2677676
BRACKET AS
311D LRR, 312D, 312D L, 315D L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 325D, 325D L, 329D, 329D L, 329D LN,...
311D LRR, 312D, 312D L, 315D L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 325D, 325D L, 329D, 329D L, 329D LN,...
3276438
BRACKET AS
311D LRR, 312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324D LN, 324...
311D LRR, 312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D L, 324D LN, 324...
3508134
BRACKET
312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 324D L, 328D LCR, 329D, 329D L, 329D LN, 336D, 336D L, 336D LN, 336D2, 345D, 345D L, 345D L VG, 349D L
312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 324D L, 328D LCR, 329D, 329D L, 329D LN, 336D, 336D L, 336D LN, 336D2, 345D, 345D L, 345D L VG, 349D L
3366103
BRACKET AS
312D, 312D L, 315D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D LN, 323D SA, 324D L, 329D, 329D LN, 336D LN, 345D L, 345D L VG
312D, 312D L, 315D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D LN, 323D SA, 324D L, 329D, 329D LN, 336D LN, 345D L, 345D L VG
1709389
BRACKET AS
320C, 320D FM RR, 320D LRR, 320D RR
320C, 320D FM RR, 320D LRR, 320D RR
2666207
BRACKET AS
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
2941740
BRACKET
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2677862
BRACKET AS
320D L, 323D LN, 323D SA
320D L, 323D LN, 323D SA
3508222
BRACKET AS
320D, 320D L, 323D L, 323D LN
320D, 320D L, 323D L, 323D LN
3755725
BRACKET
324D, 329D, 336D
324D, 329D, 336D
3755724
BRACKET
324D, 329D, 336D
324D, 329D, 336D
3197046
BRACKET AS-MOUNTING
3197042, 320D
3197042, 320D
3371186
BRACKET
320D L, 320D LN
320D L, 320D LN
3354982
BRACKET
323D LN, 323D SA
323D LN, 323D SA
2677745
BRACKET
323D LN, 323D SA
323D LN, 323D SA
3495411
BRACKET AS
321D LCR
321D LCR
3280138
BRACKET
320D LRR, 320D RR
320D LRR, 320D RR
3422863
BRACKET AS
320D LRR, 320D RR
320D LRR, 320D RR
3422840
BRACKET AS
320D LRR, 320D RR
320D LRR, 320D RR