BRACKET 3376751 - Caterpillar

Introduction
Illustration 1 g01301367
Display (1) Arrow Keys (2) Liquid Crystal Display (LCD) (3) Elevation Select Key (4) Increment/Blade Slope Direction Key (5) Manual Key (6) Menu Key (7) "Esc" Left Reset/Left Bench Key (8) "OK" Right Reset/Right Bench key (9) Grade IndicatorsThe Display is an LCD screen that displays information related to the job you are working on. The Display can be used in two modes:
"Setup" mode
"Guidance" modeThis section discusses the operation of the Display in the "Setup" mode. Refer to Operation and Maintenance Manual, "Display Description" for information on the "Guidance" mode.Setup Mode
The Display has menus that let you configure the settings of the AccuGrade - Laser System. These menus are accessed via "Setup" mode.Accessing the "Setup Mode"
To access "Setup" mode, press the Menu Key (6) .Note: For more information about the Menu Key (6), refer to Operation and Maintenance Manual, "Display" section.A screen similar to the one shown in Illustration 2 will be shown on the Display.
Illustration 2 g01301822
Configuration menuTable 1 explains the features of the "Configuration" menu that shown in Illustration 2.
Table 1
Configuration Menu Features    
Callout    Feature    Function    
1     Menu heading     Indicates which menu screen is open.    
2     Menu items     Indicates which menu items are available for selection. The menu item that is highlighted has green text and a black background.    
3     Sub-menu icon     Indicates that there is a sub-menu item within the menu item.    Using Setup Mode
Use the steps listed here to access the items in the "Configuration" menu:
Press either of the Arrow Keys (1) up or down in order to highlight the required menu item.
Press the "OK" (right reset) key (8) in order to select the highlighted menu item.
After selecting a menu item, press either of the Arrow Keys (1) in order to scroll up and down through the submenus or to change the highlighted value.Note: If you want to reset a value to the default setting, press both the "OK" (right reset) key (8) and the "Escape" (left reset) key (7) simultaneously.
To exit from a menu item, perform one of the following:
Press the "OK" (right reset) key (8) in order to accept any changes that you made and to exit the menu item.
Press the "Escape" (left reset) key (7) in order to abandon any changes that you made. Press the "Escape" (left reset) key (7) again to exit the menu item.
Press the "Escape" (left reset) key (7) in order to go back one level in the Configuration menu structure.
Press the Menu Key (6) in order to exit from the "Configuration" menu.