BRACKET 3429947 - Caterpillar

(1) 1A8096 Spring for ball check valve: Length under test force ... 14.2 mm (.56 in)Test force ... 18 1 N (4.0 .3 lb)Free length after test ... 23.9 mm (.94 in)Outside diameter ... 8.1 mm (.32 in)(2) 7B8194 Spring for stem: Length under test force ... 29.5 mm (1.16 in)Test force ... 134 11 N (30.0 2.4 lb)Free length after test ... 55.1 mm (2.17 in)Outside diameter ... 23.1 mm (.91 in)To check the striker adjustment: (a) Put a 12.7 mm (.50 in) ball of putty (or similar material) on the front frame stops.(b) Raise an empty bucket about 300 mm (12 in) and release the brakes.(c) With the engine at high idle, steer rapidly into both stops.(d) The thickness of the putty must then be 6.4 3.0 mm (.25 .12 in) after the turns.(e) If necessary, adjust the strikers until this dimension is correct.