BRACKET AS 3617891 - Caterpillar

Solution
Any existing 950H or 962H wheel loaders with the 268-9393 Coupler already installed need to be converted. The 268-9393 Coupler can be converted to the equivalent of the 268-9397 Coupler by performing the procedure that follows.Conversion Procedure
ReferenceSpecial Instruction, GEBI0217, "Installation of 274-2411 or 274-2412 Coupler Supply Group"ReferenceParts Manual, GEBP6628, "Coupler 268-9397"Required Parts
Table 1
Item     Qty     Pt. No.     Description    
(1)     1     272-6362     Lines Gp (1)    
(2)     2     9S-4182     O-Ring Plug    
(3)     2     3J-7354     O-Ring Seal    
   
4     1     274-2411     Lines Gp (1) (2)    
( 1 ) These custom products may be ordered by contacting Caterpillar Work Tools 800-752-2858.
( 2 ) This supply group is required to be installed on the machine in order to work with the converted coupler. Refer to Special Instruction, GEBI0217, "Installation of 274-2411 or 274-2412 Coupler Supply Group".Parts To Be Removed from the 268-9393 Coupler
Table 2 contains a list of parts that must be removed from the 268-9393 Coupler as part of the conversion process.
Table 2
Item     Qty     Pt. No.     Description    
(5)     1     6W-8221     Ball Valve    
(6)     1     030-6817     Elbow    
(7)     2     269-7325     Hose As    
(8)     1     004-6683     Fitting    
(9)     2     3J-1907     O-Ring Seal    
(10)     2     3J-7354     O-Ring Seal    
(11)     4     6V-8397     O-Ring Seal    
(12)     1     6V-8724     Elbow    
(13)     2     6V-9872     Connector    
(14)     1     8C-6869     Connector    Convert the Coupler
Illustration 1 g01366423
(A) 6W-8448 Block (5) 6W-8821 Guard As (6) 030-6817 Elbow (7) 269-7325 Hose As (9) 3J-1907 O-Ring Seal (10) 3J-7354 O-Ring Seal (11) 6V-8397 O-Ring Seal (12) 6V-8724 Elbow (13) 6V-9872 Connector (14) 8C-6869 Connector
Illustration 2 g01366427
(B) Hoses for third valve functions (1) 272-6362 Lines Gp (2) 9S-4182 O-Ring Plug (3) 3J-7354 O-Ring Seal
Remove the parts from the coupler that are listed in table 2. Refer to illustration 1 for more detail.
Install the lines group (1) onto the coupler's cylinder at the ports where hoses (7) were removed.
Install a plug (2) with a seal (3) at the ports on the valve blocks (A). The location of the ports is where the elbow (6) and elbow (12) were removed.Note: The valve blocks will be utilized for the machine's third valve function.
This arrangement will require a custom 274-2411 Lines Gp to be installed on the machine. Contact Caterpillar Work Tools 800-752-2858.