BRACKET AS 3708947 - Caterpillar

2. Turn the drain valve on the bottom of the fuel filter counterclockwise to open. Drain the fuel, water and sediment into a suitable container. Close the drain valve.3. Disconnect hose assembly (4) from fuel filter (3). Plug and cap immediately.4. Disconnect five fuel lines (1) from the fuel filter. Cap and plug immediately.5. Remove two bolts (2), and remove fuel filter (3) from the bracket. For installation of the fuel filter, reverse the removal steps.Disassemble & Assemble Fuel Filter
Start By:a. remove fuel filter 1. Remove ring (8) and element (7) from filter base (5).2. Remove seal (6) from the filter base. Check the seal for wear or damage, and replace if necessary.3. Remove nut (1), cap (2) and plug (4) from the filter base. Remove seal (3) from the cap. Check the seal for wear or damage, and replace if necessary. For assembly of the fuel filter, reverse the disassembly steps.End By:a. install fuel filter