parts catalog

BRACKET 3728032 - Caterpillar

3728032 BRACKET Caterpillar parts 986H BRACKET
Alternative (cross code) number:
Caterpillar 3728032 BRACKET
Weight: 1 pounds 0 kg.

Buy BRACKET 3728032 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3728032:

WHEEL LOADER  986H   Caterpillar
Number on catalog scheme: 3
  For full view, you need register


(1) Thickness of thrust plates (new) ... 5.461 0.038 mm (.2150 .0015 in)(2) Diameter of the main bearing journals (new) ... 88.880 0.020 mm (3.4992 .0008 in)(3) Diameter of the connecting rod journals (new) ... 76.180 0.020 mm (2.9992 .0008 in)(4) Tighten plugs to a torque of ... 23 4 N m (17 3 lb ft) Then "stake" the crankshaft to hold plugs in place. "STAKE" use a center punch and a hammer to change the shape of the holes as shown.(5) Crankshaft gear: Do not heat gear to more than ... 316°C (600°F)(6) End play for crankshaft (new) ... 0.064 to 0.368 mm (.0025 to .0145 in)(7) Wear sleeve and seal installation: Remove front and rear seal groups as follows: Seals and wear sleeves cannot be used again, after the seals and wear sleeves are separated.a. Use the 1P3075 Puller Group to remove the seals.b. Use the 5P7318 Distorter Group to remove the wear sleeves.Install front and rear seal groups as follows:a. Clean the outer surface of the crankshaft with 6V1541 Quick Cure Primer.b. Crankshaft seals must be installed with the lip of the seal toward the inside of the engine as shown. Make sure the correct seal is installed on each end of the crankshaft. Use 5S6296 Seal on the front and 4W0452 Seal Group on the rear. No lubrication is needed to install wear sleeves and seals.c. Do not separate seals from sleeves. Install the seal groups as a unit on each end of the engine as shown with the correct tools. See Special Instruction Form Nos. SMHS7100 for front seal assembly installation and SMHS8508 for rear seal assembly installation procedures.

Caterpillar parts catalog:

Caterpillar parts catalog
986K Wheel Loader NL800001-UP (MACHINE) POWERED BY C15 Engine
986 Wheel Loader 98600001-UP (MACHINE) POWERED BY C15 Engine
986H Wheel Loader L8S00001-UP (MACHINE) POWERED BY C15 Engine

Parts bracket Caterpillar catalog:

1647556 BRACKET
1090, 1190, 1190T, 120H, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M, ...
3477104 BRACKET AS
374F L, 390F L, 735B, 740B, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 973D, 986H, 988K, C15, C18, CX31-C18I, CX35-C18I, D8T, D9T
1546626 BRACKET AS
1090, 1190, 1190T, 120K, 1290T, 12M, 1390, 140K, 140K 2, 140M, 160K, 2290, 2390, 2391, 2491, 2590, 303.5D, 303E CR, 304D CR, 511, 521, 522, 532, 533, 541, 541 2, 543, 551, 552, 552 2, 621H, 621K, 623K...
1440896 BRACKET AS
950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 986H, 988H, IT62G, IT62G II, IT62H
2008895 BRACKET AS
950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, IT62G II, IT62H
2928741 BRACKET AS
12M, 140M, 160M, 16M, 621K, 623K, 623K LRC, 627K, 627K LRC, 834K, 854K, 966H, 972H, 986H, 988K, 992K, 993K, D10T2
1977999 BRACKET AS
980G, 980G II, 980H, 986H
2018357 BRACKET
770G, 770G OEM, 772G, 772G OEM, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797B, 797F, 854K, 966H, 966M, 966M XE, 972H, 972M, 972M XE, 980H, 980M, 982M, 986H, 992K...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.