AVSPARE.COM
parts catalog

BRACKET 3728051 - Caterpillar



3728051 BRACKET Caterpillar parts 986H BRACKET
Rating:
43
Alternative (cross code) number:
CA3728051
372-8051
3728051
Caterpillar 3728051 BRACKET

Buy BRACKET 3728051 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3728051:

WHEEL LOADER  986H   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:

(1) Connecting rod. Connecting rods and caps to be marked (by etching only) with the number of the cylinder in which they are used. Connecting rods and caps are to be marked with numbers one through eight on this side of connecting rod in relation to the connecting rod bearing retainer notch.
View A-A(2) Piston crater. Assemble piston and connecting rod with piston crater (2) and connecting rod orientation (1) as shown. Connecting rod and piston group to be installed in engine with piston crater (2) directed toward the engine centerline (both banks). Top And Intermediate Piston Ring
Top Piston Ring
(3) Top piston ring. Install top piston ring (3) with "UP-1" and "CAT" on the top side of the ring.Clearance between ends of top piston rings when installed in a cylinder: 9Y6774 Top Ring-Standard size bore (new) 114.300 mm (4.5000 in) ... 0.572 0.190 mm (.0225 .0075 in)121-4696 Top Ring-Standard size bore (new) 114.300 mm (4.5000 in) ... 0.570 0.19 mm (.0224 .0075 in)121-4697 Top Ring-Standard size bore (new) 114.300 mm (4.5000 in) ... 0.525 0.125 mm (.0207 .0049 in)Increase in clearance between ends of piston ring for each 0.03 mm (.001 in) increase in cylinder bore size ... 0.08 mm (.003 in)Intermediate Piston Ring
(4) Intermediate piston ring. Install the intermediate piston ring (4) with "UP-2" and "CAT" on the top side of the ring.Clearance between ends of intermediate piston rings when installed in a cylinder: 9Y6775 And 123-9760 Intermediate Ring-Standard size bore (new) 114.300 mm (4.5000 in) ... 0.572 0.190 mm (.0225 .0075 in)123-9759 Intermediate Ring-Standard size bore (new) 114.300 mm (4.5000 in) ... 0.780 0.180 mm (.0307 .0071 in)Increase in clearance between ends of piston ring for each 0.03 mm (.001 in) increase in cylinder bore size ... 0.08 mm (.003 in)Oil Control Ring
7E7246 And 6I3188 Oil Control Ring
(5) Oil control ring. Install oil control ring (5) with the gap in the spring 180 45 degrees away from the gap in the ring.Width of groove in piston for piston ring (new) ... 2.806 0.013 mm (.1105 .0005 in)Thickness of piston ring (new) ... 2.756 0.013 mm (.1085 .0005 in)Clearance between piston groove and piston ring ... .024 to .076 mm (.0009 to .0030 in)Clearance between ends of piston ring when installed in the cylinder: Standard size bore (new) 114.300 mm (4.5000 in) ... 0.505 0.255 mm (.0199 .0100 in)Increase in clearance between ends of piston ring for each 0.03 mm (.001 in) increase in cylinder bore size ... 0.08 mm (.003 in)After rings have been installed, rotate rings to that the end gaps are 120 degrees apart.123-8628 Oil Control Ring
(5) Oil control ring. Install oil control ring (5) with the gap in the spring 180 45 degrees away from the gap in the ring.Width of groove in piston for piston ring (new) ... 4.033 0.013 mm

Caterpillar parts catalog:

Caterpillar parts catalog
986 Wheel Loader 98600001-UP (MACHINE) POWERED BY C15 Engine
986H Wheel Loader L8S00001-UP (MACHINE) POWERED BY C15 Engine


Parts bracket Caterpillar catalog:

1647556 BRACKET
1090, 1190, 1190T, 120H, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M, ...
3477104 BRACKET AS
374F L, 390F L, 735B, 740B, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 973D, 986H, 988K, C15, C18, CX31-C18I, CX35-C18I, D8T, D9T
1546626 BRACKET AS
1090, 1190, 1190T, 120K, 1290T, 12M, 1390, 140K, 140K 2, 140M, 160K, 2290, 2390, 2391, 2491, 2590, 303.5D, 303E CR, 304D CR, 511, 521, 522, 532, 533, 541, 541 2, 543, 551, 552, 552 2, 621H, 621K, 623K...
1440896 BRACKET AS
950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 986H, 988H, IT62G, IT62G II, IT62H
2008895 BRACKET AS
950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, IT62G II, IT62H
2928741 BRACKET AS
12M, 140M, 160M, 16M, 621K, 623K, 623K LRC, 627K, 627K LRC, 834K, 854K, 966H, 972H, 986H, 988K, 992K, 993K, D10T2
1977999 BRACKET AS
980G, 980G II, 980H, 986H
2018357 BRACKET
770G, 770G OEM, 772G, 772G OEM, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797B, 797F, 854K, 966H, 966M, 966M XE, 972H, 972M, 972M XE, 980H, 980M, 982M, 986H, 992K...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.