3863919 BRACKET GP-MOUNTING Caterpillar parts
320E L, 320E LRR, HYDRAULIC
Rating:
Alternative (cross code) number:
CA3863919
386-3919
3863919
CA3863919
386-3919
3863919
EXCAVATOR, THUMB,
Number on catalog scheme:
For full view, you need register
Information:
Cat® Detect Disclaimer
The Information Display shows the Cat® Detect Disclaimer image for 10 seconds at startup. Press the "Accept" button to acknowledge the screen text.
Illustration 1 g03824998Machine Startup: Fluid Levels Check
At the startup of the machine, the "Fluid Levels" screen will appear. Press the "OK" button (1) to acknowledge the "Fluid Level" check. The main Performance page of the Display will then appear.
Illustration 2 g03825004
(1) OK Button Performance Page
The Performance Page provides the operator with specific data concerning engine operation.The initial powering up of the display screen shows Performance Page 1. Moving the UP or DOWN arrows on the scroll bar (2) allows the operator to view either Performance Page 1 or Performance Page 2. Note: The default parameters of each screen may vary with each model.Performance Page 1
Illustration 3 g03825009
Performance Page 1
(2) Scroll Bar With Regen
Performance Page 1 consists of four areas:
Engine Oil Pressure
Regen Status
Hydraulic Oil Temperature
Transmission Oil TemperatureWithout Regen
Performance Page 1 consists of four areas:
Engine Oil Pressure
Fuel Rate
Hydraulic Oil Temperature
Transmission Oil TemperaturePerformance Page 2
Illustration 4 g03825013
Performance Page 2
Performance Page 2 consists of four areas:
Blade Slope
Mainfall
Blade Rotation
Air Intake TemperatureEach area displays a selectable parameter.To select and change a viewable parameter, press a Performance page area and then press the area again to edit.A "Parameter Selection" page will appear with a list containing the various machine Parameters. The first four Parameters in the list are the Default Parameters.
Illustration 5 g03825026
Parameters will vary, depending on machine model and equipment.
(3) UP Arrow button
(4) DOWN Arrow button
Press the UP (3) and DOWN (4) arrows on the top or right side of the Display to scroll through the Parameter list. A Parameter will highlight in yellow each time the UP or DOWN arrow is pressed. Note: A Parameter will also highlight in yellow when the Parameter button is pressed.
When a desired Parameter is highlighted in yellow, press the "OK" button (1) to select and set that parameter. The parameter will appear in the selected Performance Page area. Note: The newly set Selectable Parameters will not appear at the startup of the machine. Instead, the first four Default Parameters will appear on the Performance page. Selectable Parameters will need to be reset after the start-up of machine.
The Information Display shows the Cat® Detect Disclaimer image for 10 seconds at startup. Press the "Accept" button to acknowledge the screen text.
Illustration 1 g03824998Machine Startup: Fluid Levels Check
At the startup of the machine, the "Fluid Levels" screen will appear. Press the "OK" button (1) to acknowledge the "Fluid Level" check. The main Performance page of the Display will then appear.
Illustration 2 g03825004
(1) OK Button Performance Page
The Performance Page provides the operator with specific data concerning engine operation.The initial powering up of the display screen shows Performance Page 1. Moving the UP or DOWN arrows on the scroll bar (2) allows the operator to view either Performance Page 1 or Performance Page 2. Note: The default parameters of each screen may vary with each model.Performance Page 1
Illustration 3 g03825009
Performance Page 1
(2) Scroll Bar With Regen
Performance Page 1 consists of four areas:
Engine Oil Pressure
Regen Status
Hydraulic Oil Temperature
Transmission Oil TemperatureWithout Regen
Performance Page 1 consists of four areas:
Engine Oil Pressure
Fuel Rate
Hydraulic Oil Temperature
Transmission Oil TemperaturePerformance Page 2
Illustration 4 g03825013
Performance Page 2
Performance Page 2 consists of four areas:
Blade Slope
Mainfall
Blade Rotation
Air Intake TemperatureEach area displays a selectable parameter.To select and change a viewable parameter, press a Performance page area and then press the area again to edit.A "Parameter Selection" page will appear with a list containing the various machine Parameters. The first four Parameters in the list are the Default Parameters.
Illustration 5 g03825026
Parameters will vary, depending on machine model and equipment.
(3) UP Arrow button
(4) DOWN Arrow button
Press the UP (3) and DOWN (4) arrows on the top or right side of the Display to scroll through the Parameter list. A Parameter will highlight in yellow each time the UP or DOWN arrow is pressed. Note: A Parameter will also highlight in yellow when the Parameter button is pressed.
When a desired Parameter is highlighted in yellow, press the "OK" button (1) to select and set that parameter. The parameter will appear in the selected Performance Page area. Note: The newly set Selectable Parameters will not appear at the startup of the machine. Instead, the first four Default Parameters will appear on the Performance page. Selectable Parameters will need to be reset after the start-up of machine.
Caterpillar SIS machinery equipment:
Parts bracket Caterpillar catalog:
3813508
BRACKET
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 95...
3559555
BRACKET
120M 2, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 563C, 573C, 924K, 930K, 938K, 950K, 962K, BG1000E, BG1055E, C7.1, D6K2 LGP, D6N LG...
120M 2, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 563C, 573C, 924K, 930K, 938K, 950K, 962K, BG1000E, BG1055E, C7.1, D6K2 LGP, D6N LG...
2776304
BRACKET AS
319D, 319D LN, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E LN, 325D, 325D L, 329D L, 329D LN, 329E LN, 330D L, 330D LN, 336D L, 336D LN, 336D2 L, 336E LN, CW-1...
319D, 319D LN, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E LN, 325D, 325D L, 329D L, 329D LN, 329E LN, 330D L, 330D LN, 336D L, 336D LN, 336D2 L, 336E LN, CW-1...
3531892
BRACKET AS
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
3598207
BRACKET AS
311F LRR, 312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L HVG,...
311F LRR, 312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L HVG,...
3467907
BRACKET
312E L, 316E L, 318E L, 320E L, 320E LRR, 324E L, 329E L, 336E L, 336E LH, 336F L, 349E L, 349E L VG, 349F L
312E L, 316E L, 318E L, 320E L, 320E LRR, 324E L, 329E L, 336E L, 336E LH, 336F L, 349E L, 349E L VG, 349F L
3690149
BRACKET AS-VALVE
320E, 320E L, 320E LN, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 568 FM LL
320E, 320E L, 320E LN, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 568 FM LL
3528685
BRACKET AS
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3423667
BRACKET AS
320E, 320E L, 320E LN, 323E L
320E, 320E L, 320E LN, 323E L
3689748
BRACKET GP-MOUNTING
S365C, VHS-60/4
S365C, VHS-60/4
3430113
BRACKET GP-MOUNTING
Caterpillar
Caterpillar
3320536
BRACKET GP-MOUNTING
Caterpillar
Caterpillar
3775640
BRACKET GP-MOUNTING
924K, 930K, 938K
924K, 930K, 938K
3438113
BRACKET GP-SUPPORT
980K, 980K HLG
980K, 980K HLG
3844422
BRACKET GP-MOUNTING
329E L, HYDRAULIC, STIFF LINK
329E L, HYDRAULIC, STIFF LINK
3708613
BRACKET GP-MOUNTING
HYDRAULIC, STIFF LINK
HYDRAULIC, STIFF LINK
2984130
BRACKET GP-SUPPORT
320E RR, 324E, 329E, 336E, 336E H, 336E LH
320E RR, 324E, 329E, 336E, 336E H, 336E LH