BRACKET GP-MOUNTING 3904919 - Caterpillar

Functional Test (Self Test)
If the action alarm does not sound during this test or machine monitoring displays are not functioning, do not operate the machine until the cause has been corrected. Machine operation with faulty action alarms or displays could result in injury or death as any Warning Category 3 notifications will not be relayed to the operator.
To ensure the proper operation of the monitoring system, check the system daily.The battery disconnect switch must be in the ON position.When you turn the engine start switch key from the OFF position to the ON position, the monitoring system will perform an automatic self-diagnostic test.The self-diagnostic test verifies that the outputs (gauges, indicators, and alarms) are operating correctly.When you turn the engine start switch key to the ON position, the following systems are tested for approximately one second: indicators, gauges and LCD displays.The gauges must go to the far right positions. All indicators must illuminate momentarily. All segments of the LCD displays must come on momentarily. The action alarm must sound.Warning Categories
The Monitoring System provides three warning categories.Warning Category 1
In this category, all of the following conditions will occur:
An indicator will illuminate or a gauge will be in the red zone. The indicator that illuminates or the gauge that is in the red zone identifies the machine system that needs attention.Warning category 1 requires operator awareness. Minor reductions in machine performance may occur.Warning Category 2
In this category, all of the following conditions will occur:
An indicator will illuminate or a gauge will indicate in the red zone.
The action light will flash.
A popup screen appears on the Messenger/Advisor display screen. Warning information appears on the display screen.Note: Press the "OK" button in order to acknowledge any warning messages. This will snooze the action light and the message on the display screen.Warning category 2 requires maintenance or a change in machine operation. Damage to components can occur.Warning Category 2S
In this category, all of the following conditions will occur:
An indicator will illuminate or a gauge will indicate in the red zone.
The action light will flash.
A steady action alarm will sound.
A popup screen appears on the Messenger/Advisor display screen. Warning information appears on the display screen.Note: Press the "OK" button in order to acknowledge any warning messages. This will snooze the action light and the message on the display screen.Warning category 2S requires maintenance or a change in machine operation. Severe damage to components can occur.Warning Category 3
In this category, all of the following conditions will occur:
An indicator will illuminate or a gauge will indicate in the red zone.
The action light will flash.
A sound from the action alarm will pulsate.
A popup screen appears on the Messenger/Advisor display screen. Warning information appears on the display screen.Note: "Snooze" is not available for a warning category 3.Warning category 3 requires the operator to immediately perform a safe machine shutdown. Injury to the operator or severe damage to components can occur.