BRACKET AS 3C8500 - Caterpillar

Illustration 1 g01501613When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 6950 1650 rpmCurrent draw ... 115 25 AmpVoltage ... 23 VDC (B) Clearance between the pinion and the housing is the following value. ... 9.1 mm (0.36 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in) (2) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (3) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (4) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the terminals may be equal to or greater than 0 AWG. (5) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in) (6) Final installation torque for the motor frame terminal nut ... 30.5 3.5 N m (270 30 lb in)Solenoid assemblyCurrent consumption at 20V and 25 °C (77 °F) Pull-in windings ... 49.3 3.3 AmpHold-in windings ... 6.8 Amp