3C8573 BRACKET A Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8573
3C-8573
3C8573
CA3C8573
3C-8573
3C8573
Weight: 0.05 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 1P-1863 Retaining Ring Pliers 1 Start By:
Separate the transmission and the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Separate". Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01197363
Use Tooling (A) to compress retaining ring (2). Use two people in order to remove transfer gear (1). The weight of transfer gear (1) is approximately 25 kg (55 lb).
Illustration 2 g01197364
Use Tooling (B) to remove retaining ring (2). Remove plates (4) and sun gear (3).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 1P-1863 Retaining Ring Pliers 1 Start By:
Separate the transmission and the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Separate". Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01197363
Use Tooling (A) to compress retaining ring (2). Use two people in order to remove transfer gear (1). The weight of transfer gear (1) is approximately 25 kg (55 lb).
Illustration 2 g01197364
Use Tooling (B) to remove retaining ring (2). Remove plates (4) and sun gear (3).