AVSPARE.COM
parts catalog

BRACKET 3C8671 - Caterpillar


3C8671 BRACKET Caterpillar parts
Rating:
31
Alternative (cross code) number:
CA3C8671
3C-8671
3C8671
Caterpillar 3C8671 BRACKET
Weight: 0.43 pounds 0 kg.

Buy BRACKET 3C8671 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g01526005
Note: During assembly, front face of the flywheel housing and rear face of the cylinder block must be free of oil, fuel, water, and assembly compounds.Note: Apply a small amount of blue Loctite RTV silicone to fill the space between the cylinder block, the flywheel housing, and the oil pan. The components must be assembled within 10 minutes of applying the sealant. (1) Torque for three bolts ... 115 20 N m (85 15 lb ft)Use the following procedure to tighten the bolts for the flywheel housing group:
Tighten the bolt 1 through bolt 9 in the numerical sequence that is shown in Illustration 1 to 100 20 N m (75 15 lb ft).
Tighten the bolt 10 through bolt 24 in the numerical sequence that is shown in Illustration 1 to 40 10 N m (30 7 lb ft).
Loosen all the bolts for 360 degrees.
Again, tighten the bolt 1 through bolt 9 in the numerical sequence that is shown in Illustration 1 to 135 20 N m (100 15 lb ft).
Again, tighten the bolt 10 through bolt 24 in the numerical sequence that is shown in Illustration 1 to 55 10 N m (41 7 lb ft).


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.