BRACKET (R.H.) 3G5533 - Caterpillar

1. Disconnect two electrical connectors (1).2. Disconnect eight hose assemblies (3) from two attachment cylinders diverter valves (2).3. Remove the four bolts that hold the attachment cylinders diverter valves to the front frame. Remove attachment cylinders diverter valves (2) from the machine. The following steps are for the installation of the attachment cylinders diverter valves.4. Put two attachment cylinders diverter valves (2) in position in the front frame. Install the four bolts that hold the attachment cylinders diverter valves to the front frame.5. Connect eight hose assemblies (3) to attachment cylinders diverter valves (2).6. Connect two electrical connectors (1).7. Fill the hydraulic oil tank with oil to the correct level. Refer to R1300 L.H.D. Operation & Maintenance Manual, Form No. SEBU7321 (9EL9617) for the correct filling procedure.End by:a. Remove steering frame lock pin.