BRACKET AS 3T1753 - Caterpillar

Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the power train oil into a suitable container for storage or disposal.
Illustration 1 g01287607
Remove hose (1) .
Illustration 2 g01287608
Attach a suitable lifting device to gear pump (2). The weight of gear pump (2) is approximately 27 kg (60 lb).
Remove bolts (3) and gear pump (2) .