BRACKET 4187884 - Caterpillar

Illustration 3 g01617433
Rear view (15) Torque for two nuts ... 10 1 N m (7.38 0.74 lb ft) (16) Torque for the breather assembly ... 54 3 N m (39.83 2.21 lb ft) (17) Assemble the cover so that the cover is flush with the recess of the lever. (18) Torque for two O-ring plugs ... 54 3 N m (39.83 2.21 lb ft) (19) Torque for the bolt ... 88 4 N m (64.9 2.95 lb ft) (20) Torque for the plug assembly ... 54 3 N m (39.83 2.21 lb ft) (21) Torque for 14 self-locking bolts ... 65 3 N m (47.94 2.21 lb ft)
Illustration 4 g01617653
Section H-H (22) Torque the four bolts in a crisscross sequence to 7 N m (5.16 lb ft) then final torque in the same sequence. ... 32 N m (23.60 lb ft) (23) Thickness of five new friction discs and five new clutch discs for the forward clutch and the reverse clutch is 19.40 0.65 mm (0.764 0.026 inch). Thickness of one new 6Y-7929 Friction Disc ... 2.05 0.08 mm (0.081 0.003 inch) Minimum thickness of one worn 6Y-7929 Friction Disc ... 1.62 mm (0.064 inch) Thickness of one new 274-4553 Clutch Disc ... 1.78 to 1.88 mm (0.070 to 0.074 inch) (24) Before assembly, apply 6V-6640 Sealant to the flange faces. (25) As required, use the following shims in order to obtain a end play of 0.03 to 0.08 mm (0.001 to 0.003 inch):Note: All the shims must be located against the bearing cup of the rear case. The 7T-3034 Spacer must be in contact with the transmission case. 7T-3034 Spacer Quantity ... 1 Thickness of the spacer ... 1.98 to 2.02 mm (0.078 to 0.080 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9144 Shim Quantity ... 1 Thickness of the shim ... 0.05 mm (0.002 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9147 Shim Quantity ... 1 Thickness of the shim ... 0.08 mm (0.003 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9146 Shim Quantity ... 1 Thickness of the shim ... 0.13 mm (0.005 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9145 Shim Quantity ... 1 Thickness of the shim ... 0.18 mm (0.007 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9143 Shim Quantity ... 1 Thickness of the shim ... 0.38 mm (0.015 inch) Outside diameter ... 64.5 mm (2.54 inch) 6T-9142 Shim Quantity ... 1 Thickness of the shim ... 0.51 mm (0.020 inch) Outside diameter ... 64.5 mm (2.54 inch) (26) As required, use the following shims in order to obtain a end play of 0.03 to 0.08 mm (0.001 to 0.003 inch):Note: All the shims must be located against the bearing cup of the rear case. The 121-7398 Spacer must be in contact with the transmission case. 121-7398 Spacer Quantity ... 1 Thickness of the spacer ... 2.0 mm (0.08 inch) Outside diameter ... 79.5 mm