BRACKET AS 4200343 - Caterpillar

Disconnect hose assemblies (23). Disconnect hoses (22).
Disconnect hose assemblies (24), at the quick disconnect. Disconnect harness assemblies (25).
Illustration 9 g01755454
Loosen clamps (27) and (26). Remove tube assembly (28).
Illustration 10 g01758073
Remove harness assemblies (29) from both tube assemblies (30).
Loosen clamps (31).
Illustration 11 g01758134
Attach a suitable lifting device to tube assemblies (30). The weight of tube assemblies (30) is approximately 54 kg (120 lb).
Remove brackets (32) and remove tube assemblies (30). Repeat for the other side.
Place tube assemblies (30) into Tooling (C) for temporary storage.
Illustration 12 g01758136
Disconnect hose assemblies (33) and (35). Disconnect harness assembly (34).
Illustration 13 g01759713
Illustration 14 g01759716
Remove covers (36).
Remove the clamps and remove bellows (37).
Illustration 15 g01759896
Illustration 16 g01759898
Disconnect harness assemblies (38), (39), (40), and (41).
Illustration 17 g01759979
Disconnect hose assembly (42).
Illustration 18 g01761494
Disconnect hose assemblies (43).
Illustration 19 g01761604
Disconnect hose assemblies (44).
Illustration 20 g01761713
Illustration 21 g01761733
Remove bolt (45) from both sides of the engine.
Remove bolts (47) and cap (46). Repeat for the other side.
Illustration 22 g01761814
Illustration 23 g01761815Note: The power box on Tooling (B) has been relocated in order to fit under the platform.
Install Tooling (D).
Use Tooling (B) and a suitable lifting device to remove engine (48). The weight of engine (48) is approximately 11,612 kg (25,600 lb).