BRACKET 4232079 - Caterpillar

Illustration 3 g00628163
View from engine compartment
Install two hydraulic hose assemblies (27) on the left side of the hydraulic oil tank.
Illustration 4 g00628144
Connect suction line (26) to implement pump (24). Install four bolts (25) .
Illustration 5 g00628134
Install bolt (23). Install bolt (22) through the access hole.
Repeat Step 5 for the opposite side of the machine.
Illustration 6 g00628065
Place cover (21) in position on the machine. Install two bolts (20) .
Illustration 7 g00628129
Install bolt (19) on the top of the hydraulic oil tank.
Illustration 8 g00628056
Position pressure sensor (18) on the tank. Install bolt (17) .
Repeat Step 9 for the opposite side of the tank.
Illustration 9 g00628053
Connect two hydraulic hose assemblies (16) to hydraulic oil tank (3) .
Illustration 10 g00628049
Place pump (14) and the bracket on the hydraulic oil tank. Install three bolts (15) .
Illustration 11 g00628042
Install two hydraulic hose assemblies (13) to the return manifold. Install three hydraulic hose assemblies (12) to the return manifold.
Illustration 12 g00628025
Place the hood in position on the machine. Install three bolts (10) in hinge (11). Repeat for the opposite side.
Illustration 13 g00628008
Place hood support (8) in position. Install nut (9) .
Illustration 14 g00627918
Connect electrical connector (7) to the vacuum pump.
Illustration 15 g00627907
Connect three electrical connectors (5) on the hydraulic tank. Install wire ties (6) that hold the wiring harness to the tank.
Illustration 16 g00627901
Connect hose (4) from the vacuum pump.
Illustration 17 g00627857
Place the valves and the mounting plate in position on the machine. Install three bolts (2) .
Install six electrical connectors (1) ., End By: Fill the hydraulic tank. Refer to Operation and MaintenanceSEBU7196, "Hydraulic System Oil - Change".