BRACKET 4457898 - Caterpillar

Flow Meter Tee Test Procedure - VI
HYDRAULIC SCHEMATIC FOR WHEEL DOZER WITH FLOW METER INSTALLED
1. 9S2000 Flow Meter. 2. Manual load valve. 3. Control valve for tilt circuit. 4. Relief valve for main system pressure. 5. Control valve for lift circuit. 6. Pilot check valve. 7. Tip cylinder (left side). 8. Dozer. 9. Tee tap. 10. Make-up valve for head end of lift cylinder. 11. Pilot check valve. 12. Check valve for tilt circuit. 13. Check valve for lift circuit. 14. Make-up valve for rod end of lift cylinder. 15. Pump. 16. Check valve for tip circuit. 17. Control valve for tip circuit. 18. Return line to tank. 19. Tilt cylinder. 20. Tip cylinder (right side).
FLOW METER INSTALLED (See Tee Test Tooling Chart for parts reference)
BLOCKING LOCATION FOR TIP CYLINDERS (See Tee Test Tooling Chart for parts reference)
IDENTIFICATION OF LINES ON FRONT OF TANK
1. Tip cylinder (rod end). 2. Tip cylinder (head end). 3. Tilt cylinder (head end). 4. Tilt cylinder (rod end). 5. Pump supply line. 6. Lift cylinder (rod end). 7. Lift cylinder (head end).
TACHOMETER DRIVE INSTALLED (See Tee Test Tooling Chart for parts reference)