BRACKET GP-MTG 4578352 - Caterpillar

(3) Torque for nuts on shaft ... 500 25 lb. ft.(680 35 N m)(7) Torque for bolts (six) ... 85 5 lb. ft.(115 7 N m)(8) Torque for bolts (eight) ... 175 15 lb. ft.(240 20 N m)(9) Torque for 18 bolts ... 200 20 lb. ft.(270 25 N m)Adjustment of Winch Drum
1. Put flange (1) in position in the case without shims (2) and the O-ring seal.2. Install bolts (6) and tighten to a torque of ... 75 10 lb. ft.(100 14 N m)3. Measure the gap between the case and the face of flange (1) with a feeler gauge.4. Remove bolts (6) and flange (1).5. Install the O-ring seal on flange (1).6. Put lubricant on the outside of the O-ring seal and the bore in the case.7. Install flange (1) in the case with an amount of shims (2) the same thickness as the gap measured in Step 3.8. Install bolts (6) and tighten to a torque of ... 75 10 lb. ft.(100 14 N m)9. Install washer (5) and nut (4).10. Hold the nut on the other end of the shaft and tighten nut (4) to a torque of ... 500 25 lb. ft.(680 35 N m)