BRACKET 5264530 - Caterpillar

Illustration 6 g00860942
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Install spring (25) in spool assembly (24) .
Illustration 7 g00860941
Install balls (23) in spool assembly (24) .
Illustration 8 g00860940
Install spacers (22) and spool cap (18). Install screws (21) on valve housing (1). Tighten the screws to a torque of 16 1 N m (12 1 lb ft).
Illustration 9 g00860939
Install detent sleeve (19) and ball (20) in spool cap (18) .
Illustration 10 g00860938
Install end cover (17) and retaining ring (16) in spool cap (18) .
Illustration 11 g00860937
Install O-ring seal (15) on relief valve (14) .
Illustration 12 g00860936
Install relief valve (14) in valve housing (1). Tighten the relief valve to a torque of 45 4 N m (33 3 lb ft).
Illustration 13 g00860935
Install O-ring seal (13) on relief valve (12) .
Illustration 14 g00860934
Install relief valve (12) into spool section (10). Tighten the relief valve to a torque of 45 4 N m (33 3 lb ft).
Install O-ring seal (11) in spool section (10) .
Illustration 15 g00860933
Install the rod and nut (8). Install the rods and nuts (9) on spool section (10) .
Install valve housing (1) on the rod and bolt (8). Install the valve housing on the rods and bolts (9) .
Illustration 16 g00860932
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install O-ring seal (7), poppet (6), and spring (5) on valve housing (1) .
Illustration 17 g00860931
Install spool section (4) on valve housing (1) .
Install nuts (2) and (3). Tighten nut (2) to a torque of 48 N m (33 lb ft). Tighten nuts (3) to a torque of 19 N m (14 lb ft).End By: Install the control valve (leveling blade). Refer to Disassembly and Assembly, "Control Valve (Leveling Blade) - Install".