BRACKET AS 5326937 - Caterpillar

the Pump Electronic Monitoring System (PEMS) Electronic Control Module (ECM):The ECM must be programmed to include information specific to the installation.Items that must be programmed:
Well Stimulation Pump Serial Number: This serial number is used to set the serial number of the power end of the well stimulation pump.
Machine Serial Number: This serial number is used to set the VIN for the trailer that the pump is on. This value must be set to identify the trailer that the pump is part of.
Well Stimulation Pump Plunger Diameter: This information can be found in the pump specifications manual.
Well Stimulation Pump Rated Speed: This information can be found in the pump specifications manual.
Well Stimulation Pump Stroke Length: This information can be found in the pump specifications manual.
Well Stimulation Pump Plunger Firing Order: This information can be found in the pump specifications manual.
Well Stimulation Pump Condition Monitoring System Installation Status: This feature when installed will allow for additional monitoring for the operator. Factory passwords are required and there is a charge to install this feature.
Well Stimulation Pump Condition Monitoring System Enable Status: This feature must be enabled to allow the additional monitoring for the operator.Extra event code trip points will be available in the configuration screen. The trip points may be set based on the customers recommendations.