BRACKET AS 5337713 - Caterpillar

Removal Procedure
Start By:
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 1 g00783999
Remove bolts (2) from step plate (1). Remove step plate (1) in order to gain access to the accumulator charging valve.
Illustration 2 g01079981
Disconnect hose assemblies (4) and tube assembly (5) from accumulator charging valve (3).
Illustration 3 g00881234
Disconnect tube assembly (6) from the accumulator charging valve. Disconnect harness assembly (7).
Illustration 4 g00881238
Remove two bolts (8) and the washers. Remove the accumulator charging valve. Installation Procedure
Illustration 5 g00881238
Install the accumulator charging valve in position in the machine. Install two bolts (8) and the washers.
Illustration 6 g00881234
Connect tube assembly (6) to the accumulator charging valve.
Connect harness assembly (7).
Illustration 7 g01079981
Connect hose assemblies (4) and tube assembly (5) to accumulator charging valve (3).
Illustration 8 g00783999
Install step plate (1) and bolts (2).