BRACKET 5615842 - Caterpillar

If excessively dirty, clean condenser with a brush. To prevent damage or bending of the fins, do not use a stiff brush.Repair the fins if found defective.
Open the access door on the left side of the machine.
Illustration 1 g00537515
This condenser is used in the following models: (CFB1-UPCFL1-UPCFT1-UP).
Illustration 2 g00916643
This condenser is used in the following models: (AKE1-UPBTL1-UPCJC1-UP)
If the condenser opens on a hinge then turn the latch in order to open the condenser. If the condenser does not open on an hinge then continue to step 3.
Inspect the condenser for debris. Clean the condenser, if necessary.
Use clean water to wash off all dust and dirt from the condenser.
Close the access door.