BRACKET 5V1413 - Caterpillar

PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-1500 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
An additional 0.5 hours is allowed for an After Failure repair type.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Item (1) 119-4594 Washer
Item (2) Link Assembly
Item (3) 191-9638 Pin Assembly
Item (4) 326-5498 Lift Arm Assembly (259B3,257B3, and 242B3) and 218-5898 Lift Arm Assembly (252B3)
Item (5) 190-7971 Washer-Hard
Item (6) 8T-4186 Bolt
I. Inspect the total clearance between the link assembly (Image1.1.2, items 2) and the lift arm frame (Image1.1.2 item 4) on each side of the machine or between the link assembly (Image1.1.2 item 2) and the washer (Image1.1.2 item 5).
2. If the clearance is between 0.5 to 2.5mm per side, no shimming is needed to be added. Remove the bolt (Image1.1.2, items 6) and apply a bead of threadlock material (like Loctite Blue 242) on the bolt thread before reinstalling the bolt on the pin assembly. Tighten the bolt to a specified torque of 55 N.m. Claim as a Before Failure repair type (PD Code 56).
3. If the clearance is outside of the specified range on either side, remove 119-4594 Washers (Image1.1.2 items 1) as needed, in order to achieve clearance of 0.5 to 2.5mm. Apply a bead of threadlock material (like Loctite Blue 243) on the bolt threads before reinstalling the bolt (Image1.1.2, items 6) on the pin assembly. Tighten the bolt to a specified torque of 55 N.m. Claim as an After Failure repair type (PD Code 96).
Image1.1.1
Image1.1.2