BRACKET 6G7264 - Caterpillar

Engine:
G3606 (S/N: 3XF341-UP)
G3608 (S/N: 4WF233-UP)
Description of Change: A two-piece clip is now used to retain the tube assemblies in the Hydrax system on G3606 and G3608 Engines. The two-piece clips secure the hydraulic lines in the Hydrax system. The clips prevent the hydraulic lines from vibrating against the bracket for the air choke actuator. The two-piece clips are made of thicker steel than the former one-piece clip.Adaptable To: The two-piece clip can be installed on any of the G3606 and G3608 Engines that use the Hydrax system. The two-piece clip is adaptable to the engine serial numbers that are shown below:
G3606 3XF114-UP
G3608 4WF68-UPEarlier engines that have converted from the Heinzmann governor to the Hydrax system may use the two-piece clip.Table 1 indicates the Engine Arrangement Numbers and the Engine Oil Lines Groups that are involved.
Table 1
Engine Model     Arrangement Number     Engine Oil Lines Group     Configuration Data    
G3606     7C-4106     142-5067 Engine Oil Lines Gp     VTC54 Turbocharger    
G3606     176-3606     149-3931 Engine Oil Lines Gp     TSP57 Turbocharger    
G3608     7C-4108     141-9902 Engine Oil Lines Gp        The former 5K-9660 Clip may possibly break in the radius between the mounting hole and the loop that goes around the tube assembly. The clip is used in order to attach the hydraulic lines to the 130-3357 Bracket for the air choke actuator. The 5K-9660 Clip is a one-piece clip that secures the tube assemblies that run to the Hydrax system.
Illustration 1 g00841158
This is a 5K-9660 Clip .The 8T-1887 Clip and the 8T-1888 Clip must be used together in order to replace the former 5K-9660 Clip.
Illustration 2 g00841569
This Illustration shows the assembly of a 8T-1887 Clip and a 8T-1888 Clip .In this installation, 4 of the 8T-1887 Clips and 4 of the 8T-1888 Clips are required to fasten the tube assemblies to the 130-3357 Bracket. The bracket is used in order to mount the air choke actuator to the engine. The hardware for mounting the clips is reusable.
Illustration 3 g00842073
This is an illustration that shows the tube assemblies for the Hydrax system. (1) 8T-1887 Clips (1) 8T-1888 Clips (2) Oil drain line for the Hydrax system. (3) Oil supply line for the Hydrax system. (4) 130-3357 Bracket