BRACKET 6N3942 - Caterpillar

Illustration 18 g01305019
Raise the temperature of bearing cone (32) .
Install bearing cone (32) onto shaft (35) .
Install shaft (35) and bearing cone (32) into swashplate (33) and rotating group (34) .
Illustration 19 g01305018
Install pump housing (31) onto bearing cone (32), swashplate (33), and rotating group (34). Turn the pump housing over 180 degrees and hold the components in the pump housing.
Illustration 20 g01305016
Install shim (30) .
Illustration 21 g01305015
Install piston (28) and bearing cone (29) .
Illustration 22 g01305014
Install O-ring seal (25), spring (26), and piston (27) .
Illustration 23 g01306958
Install O-ring seals (22) and port plate (23) .
Illustration 24 g01305012
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install head (21) and bolts (20) .
Illustration 25 g01305011
Install spool (18) and spool (19) .
Illustration 26 g01305010
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install screw (16), retainer (17), spring (15), spring (14), O-ring seal (13), housing (12), nut (11), and adjustment screw (10) .
Illustration 27 g01305007
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install retainer (9), spring (8), spring (7), O-ring seal (6), housing (5), and adjustment screw (4) .
Illustration 28 g01305006
Install gasket (3) .
Illustration 29 g01305005
Install valve (2) and bolts (1) .End By: Install the piston pump.