BRACKET AS-FAN 6N6490 - Caterpillar

If a cabinet is supplied by the customer for installation of the batteries, then install a kit for the "QF1" circuit breaker within the cabinet.The circuit breaker enables the following actions to occur:
The circuit breaker can open in the event of an emergency shutdown.
The UPS can detect the position of the circuit breaker.The kit includes the following components:
AITZ board
"QF1" circuit breaker
"XR1" terminal block
Support plate
Two 5 m (16.5 ft) cables
Hardware for installing componentsInstallation
Illustration 1 g02143366
Front view (60) AITZ board (61) Shelf for batteries (62) Circuit breaker "QF1" (63) Terminal block"XR1"
Illustration 2 g02143367
Side view (60) AITZ board (61) Shelf for batteries (62) Circuit breaker"QF1" (63) Terminal block"XR1" (64) Trench for cables (65) Bottom connections
Illustration 3 g02143369
Top view (62) Circuit breaker "QF1" (63) Terminal block "XR1" (66) Screw (67) Opening for cables (68) Support plate
Position the support plate (68) for circuit breaker "QF1". Attach the support plate by using two screws (66) .
Attach circuit breaker "QF1" (62) to the support plate.
Illustration 4 g02143384
(62) Circuit breaker "QF1" (63) Terminal block "XR1"
Bolt the support for terminal block "XR1" (63) to the front right hand upright of the cabinet.
Connect terminal 1 and terminal 4 of terminal block "XR1" to the inverter in the cabinet.
Attach the AITZ board (60) in the upper area of the cabinet. This board is used in order to measure the internal temperature within the cabinet.
Illustration 5 g02143371
(70) Protective cover (71) Screw
Attach the protective cover (70) for circuit breaker "QF1" to the frame by using two screws (71) .
Connect a cable between the AITZ board and terminal block "XR1".