BRACKET 6W5692 - Caterpillar

(2SL),
330L (5YM),
350L (3ML) EXCAVATORS MATERIAL HANDLER ARRANGEMENTSProblem:
The cable assemblies used to support the cab riser and cab may pull apart. The use of these cables may result in an unsafe situation. Any machine equipped with these cables should be serviced immediately to remove the cab riser cables.Solution:
The 122-4913 and 130-2090 Cable Assemblies are a part of the cab riser groups on the listed models. These two cables are used to provide support of the cab riser and cab when the cab riser is tilted for shipping or to service the generator.Remove all cables from the appropriate cab riser groups and return to Caterpillar at the following address along with the machine PIN and dealer information attached to the cables.Caterpillar Inc.
Wheel Loader And Excavator Division, Aurora
Route 31
Montgomery, IL 60538
ATTN: HEX Service Engineering
Refer to the instructions on Procedure To Tilt Cab Riser in the Maintenance section in the following Manuals:SEBC1028 - 325 Material HandlerSEBC1014 - 330 Material HandlerSEBC1020 - 350 Material Handler If there are any questions with reference to the removal of the cables, please contact the HEX Service Engineer at (708) 859-6376.COPYRIGHT 1996 CATERPILLAR ALL RIGHTS RESERVED