BRACKET AS 6Y3125 - Caterpillar

Disassembly Procedure (Main Relief Valve)
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1853 Retaining Ring Pliers 1 Start By:
Remove the control manifold. Refer to Disassembly and Assembly, "Control Manifold - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01800757
Remove bolts (1), cover (2), and O-ring seal (3).
Illustration 2 g01800766
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove bolts (4), cover (5), screw (6), and O-ring seal (7). Note: Mark the position of the screw for assembly purposes.