BRACKET-SHAFT 7C7011 - Caterpillar

Use this procedure in order to troubleshoot an engine overspeed or use this procedure if one of the following event codes is active. Refer to Troubleshooting, "Event Code List" for information about event codes and the default trip points for these codes.
Table 1
Event Code    
Code and Description    Conditions which Generate this Code    System Response    
E004(3) Engine Overspeed Shutdown     The engine rpm has exceeded the trip point for engine overspeed for the delay time.     The air shutoff will be activated. The engine will shut down.
Power must be cycled to the engine Electronic Control Module (ECM) in order to reset the code.
The code is logged.    
E190(1) Engine Overspeed Warning     The code is logged. Probable Causes
Intake air is combustible.
Sudden drop of loadRecommended Actions
Intake Air is Combustible
Check for hydrocarbons in the surrounding atmosphere. Do not operate the engine in an environment with hydrocarbons in the surrounding atmosphere.Sudden Drop of Load
Decrease the load on the engine gradually.