BRACKET 7V8624 - Caterpillar

Required Parts
Table 1
Required Parts    
Serial Number Prefix     Qty     Part Number     Description    
B1L, B1M     1     176-8232     Exhaust Pipe As    
B1W     1     279-4915     Exhaust Pipe As    
B1N, B1P     1     231-7646     Exhaust Pipe As    
B1R     1     276-2246     Exhaust Pipe As    
L4D, L4E, L4F     1     368-2777     Exhaust Pipe As    
LFB     1     389-1818     Exhaust Pipe As    
LFF, LFH     1     383-8656     Exhaust Pipe As    Installation of Exhaust Pipe Assembly
Align both pipes being connected by Exhaust Pipe As .Note: Fit the Strip Wound Flex portion of the pipe in a straight line and in the mid stretch position.
Strip Wound Flex portion of pipe can extend and compress. The flex should be extended midway between fully compressed and the fully stretched position at installation. To extend the flex pipe to the mid position, follow the steps below.
Start with the flexible section of the pipe in the fully compressed position.
Illustration 1 g03368650
Bend the flexible section of pipe by hand as seen in Illustration 1.
Illustration 2 g03368661
Place the bent section of pipe on a flat surface and apply light force to straighten the pipe as seen in Illustration 2. This procedure will set the flex pipe to the mid point of stretch. The pipe is now ready for installation.
Illustration 3 g03368657
Install the Exhaust Pipe Assembly and check for flex pipe straightness with a straight edge.