BRACKET (R.H.) 8D2489 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty.
A 384-9657 Lifting Eye Assembly 1 Note: Inspect all O-rings, seals, and gaskets for wear or damage. Replace if necessary.
Illustration 1 g06167863
Attach Tooling (A) at position (X). The engine oil pump (17) weighs approximately 55 kg (121 lb).
Position the O-ring seals and engine oil pump (17) and install six bolts (16).
Illustration 2 g06167830
Install three bolts (15).
Illustration 3 g06167809
Position O-ring seals and elbow assembly (13) and install three bolts (11), three bolts (12), and four bolts (14).
Connect hose (10).
Illustration 4 g06167770
Position the O-ring seals, gaskets and intake manifold (9), install eight bolts (8), and connect three sensors (7).
Illustration 5 g06321672
Connect harness assembly (18).
Position tube (6), attach two clip top straps (5), and install four bolts (4).
Illustration 6 g06167377
Position O-ring seals and tube (3), attach slip top strap (2), and install four bolts (1).End By:
Install the alternator.