BRACKET AS 8E6269 - Caterpillar

Change Filters
Remove the floorplate.
Illustration 1 g00677466
Remove the housing drain plugs and allow the oil to drain. Remove the covers.
Illustration 2 g00677467
Remove the used filter elements. Properly discard the used filter elements from the housing.
Clean the inside of the housing with a clean cloth.
Clean the covers. If the cover seals are damaged, install new cover seals.
Install the new filter elements.
Install the housing covers.
Clean the drain plugs. Install the drain plugs.Clean Screen, Magnets, and Breather
Remove the floorplate.
Illustration 3 g00677548
Remove the cover.
Illustration 4 g00677551
Remove the screens and the magnets.
Wash the screens and the magnets in clean nonflammable solvent. Clean the magnets with a cloth, stiff bristle brush or pressure air.
Install the magnets.
Install the screens.
Inspect the spring and the seal. If the spring and the seal are damaged, install a new spring and seal.
Install the cover and the floorplate.
Illustration 5 g00680159
Open the right side access door.
Illustration 6 g00681432
Remove the breather. Clean the breather with clean nonflammable solvent. Install the breather.
Close the access door.