BRACKET 8F3337 - Caterpillar

Removal Procedure
Illustration 1 g02321848
Disconnect tube assembly (1) and disconnect harness assembly (4) .
Remove two bolts (3) and remove manifold (2) .
Disconnect fitting (4) .
Remove bolts (2) and remove pressure sensor (3) .
Illustration 2 g02321874
Remove pressure sensor (5) and O-ring seal (6) from manifold (2) .Installation Procedure
Install pressure sensor (5) in reverse order.Note: Do not pre-tighten the sensor using the plastic portion of the sensor. Pre-tighten the sensor using the metal hex portion of the sensor. Damage can occur to the sensor if pre-tightened using the plastic portion of the sensor.
Tighten pressure sensor (5) to a torque of 10 2 N m (89 17 lb in).